Page 16 - Latest News
Hallite 18 heavy duty Single Acting Seal
A medium to heavy duty single acting seal, the Hallite 18 has shown itself over the years to be an effective and robust seal in a wide variety of applications.
The seal comprises a rubberised fabric U form base to which is bonded a rubber energiser.
The seal section is pre-loaded by the housing when installed to ensure effective sealing at low pressure. When the pressure increases the rubber energises the U form to increase the sealing area and hence the efficiency of the seal. The strength and durability of the rubberised fabric combines with its ability to retain lubricant keeping friction and wear to a minimum.
In a piston application the Hallite 18 should not be used back to back to make a double acting assembly.
NB: Size lists give “on line” tolerances for rod applications.
Hallite 621 ROD SEAL
The Hallite 621 is a top-of-the-range twin lip rod seal designed to provide a dry sealing solution in heavy-duty applications.
The secondary sealing lip located behind the primary sealing lip improves stability of the seal in the gland. The unique profile of the NBR energiser ensures the precision trimmed primary sealing lips maintain contact under low or no pressure situations while ensuring proper sealing at higher pressures. This unique profile is also used in the Hallite 622 twin lip rod seal. The Hallite 621 also incorporates an acetal anti-extrusion ring to withstand side loads and extreme pressure peaks even with the extrusion gaps, which are the result of using remote plastic bearing strips like the Hallite 506 or 708.
The Hallite 621’s seal shell is molded in Hythane® 181, Hallite’s high-performance polyurethane, for easy installation and excellent low temperature performance.
Hallite 730 PISTON SEAL Double-Acting
The Hallite 730 double-acting piston seal in a four part assembly is designed for use in heavy-duty applications where position holding ability is important, such as longwall mining roof support applications using water-based fluids and large diameter crane cylinders using standard hydraulic oils.
Hallite 51 Piston Seal
The Hallite 51 is a heavy duty piston seal which, when installed in pairs, provides an excellent double acting piston design. It is particularly suitable for difficult operating conditions such as pressure surging, vibration or some misalignment.
The seal is an assembly of three parts, a male adaptor, a V ring and a female adaptor. Both the V ring and female adaptor are made from rubberised fabric which has a durability and strength, it also retains lubricant at the sliding surfaces so friction and wear are kept to a minimum. The V ring being the primar seal is more flexible than the adaptor whic supports it and prevents extrusion damage. At higher pressures the adaptor deforms and becomes a secondary seal.
The polyacetal male adaptor has grooves across the face to ensure pressure is evenly applied to the V ring.
Hallite 653 ROD BUFFER SEAL
The Hallite 653 single-acting rod buffer seal is designed to be used in conjunction with a high-performance rod seal, such as the Hallite 605 and 621, to protect the primary seal from shock pressure loading and high frequency pressure spikes in the hydraulic system. The design allows oil to pass through to the rod seal while holding back pressure spikes. The Hallite 653 is a patented product (European patent no. 0427554BI; U.S.A. patent no. 5088747) that also allows pressure to pass back into the system preventing a pressure trap between the rod seal and the buffer seal. The Hallite 653 is an excellent pressure buffer option in heavy-duty applications and offers extended sealing system life and performance.
Hallite 13 Vee Pack Rod Seal for heavy duty applications
The Hallite 13 is a Vee pack rod seal for heavy duty applications offering excellent performance and long life even under difficult operating conditions such as pressure surges, vibration and some misalignment. The seal assembly consists of a male and female adaptor and 5 vee rings.
The male adaptor is usually manufactured form polyacetal but some of the larger sizes use rubberised fabric. It has grooves across one face to ensure equal pressure to the sealing edges of the vee ring.
All sizes have vee rings manufactured from rubberised fabric because this has strength and durability and permits an oil film to lubricate the other parts of the seal. Some sizes are supplied with rubber vee rings between the rubberised fabric vee rings.
The female adaptor uses a hard rubberised fabric to support the vee rings and protect them from extrusion damage. At high pressure the lips of the adaptor act as a secondary seal.
Hallite 11 Vee Pack Rod Seal
The Hallite 11 is a vee pack rod seal for medium duty applications offering excellent performance and long life even under difficult operating conditions such as pressure surges, vibration and some misalignment. The seal consists of a male and female adaptor and 5 vee rings. The male adaptor is usually manufactured from polyacetal but some of the larger sizes use rubberised fabric. It has grooves across one face to ensure equal pressure to the sealing edges of the vee ring.
All sizes have three rings manufactured from rubberised fabric because this has strength and durability and permits an oil film to lubricate the other parts of the seal. Two rubber vee rings are supplied between the rubberised fabric vee rings (up to and including 140mm diameter) to aid low pressure sealing.
The female adapter uses a hard rubberised fabric to support the vee rings and protect them from extrusion damage. At high pressure the lips of the adaptor acts as a secondary seal.
The proportions of the range have been determined to give a satisfactory performance when used with the recommended operating conditions.
Hallite 862 WIPER
DESIGN
The Hallite 862 single-lipped, metal-cased wiper is designed to press fit into open groove housings for a wide range of applications. The precision trimmed polyurethane wiping element is securely bonded to a metal case treated to inhibit rust. The proportions of the polyurethane wiping lip follow the side movement of the rod to clear away heavily deposited dirt and make this wiper an excellent choice for dirty conditions. The Hallite 862 is offered in a range of sizes suitable for standard American inch wiper housings.Hallite 65 Double Acting Seal
Ideal for light duty one piece piston applications, the Hallite 65 double acting seal is a simple, effective and economical design for pressures up to 160 bar/2500 p.s.i. its compact dimensions enable the designer to keep the length of the piston to a minimum. It is an assembly of a continuous rubber seal and two scarf cut bearings. The nitrile rubber seal is designed to be pre-loaded by the housing to ensure an effective seal at low pressure. The outward thrust of the rubber seal on the bearings as it reacts to increasing pressure prevents any extrusion damage in the sealing area. The polyacetal bearings are proportioned to support the piston and its side load.

- ก้าวสู่ปีที่ 18 ของบริษัท อีโคซีล จำกัด
- Cutting Board เขียงเกรดอุตสาหกรรมสำหรับงานอาหาร
- Ecoseal 5.5 ลด 10% วันนี้-30 พ.ค.2569 เท่านั้น
- ซื้อ 1 แถม 2 มัดรวมความคุ้มค่าจาก Ecoseal x XIFLON
- BIPV นวัตกรรมวัสดุก่อสร้างผลิตไฟฟ้า
- รู้หรือไม่! จริงๆ แล้ว "ซุปเปอร์ลีน" ไม่ใช่ชื่อประเภทพลาสติก
- ประกาศแจ้งย้ายสำนักงานขายและส่วนงานผลิต แผนกพลาสติกวิศวกรรม
- บริษัท อีโคซีล จำกัด ขอแจ้งกำหนดการวันหยุดทำการช่วงสิ้นปี
- Bowling Challenge and New Year Party
- โปรโมชั่นพิเศษ JOINTSEALANT ปะเก็นเทปล่อนนิ่ม ซื้อ 1 แถม 2
- July 2026
- June 2026
- May 2026
- April 2026
- March 2026
- February 2026
- December 2025
- November 2025
- October 2025
- September 2025
- July 2025
- April 2025
- March 2025
- January 2025
- October 2024
- September 2024
- August 2024
- July 2024
- April 2024
- February 2024
- January 2024
- December 2023
- September 2023
- August 2023
- June 2023
- May 2023
- March 2023
- February 2023
- September 2022
- August 2022
- July 2022
- January 2022
- December 2021
- November 2021
- October 2021
- August 2021
- June 2021
- May 2021
- April 2021
- March 2021
- February 2021
- January 2021
- December 2020
- November 2020
- October 2020
- September 2020
- July 2020
- June 2020
- May 2020
- April 2020
- March 2020
- February 2020
- January 2020
- September 2019
- December 2017
- o-ring
- hydraulic rod seal
- โอริงกล่อง
- nbr
- o-ring kits
- wipers
- viton
- bore tape
- kastas seal
- hnbr
- สายวัดซีล-โอริง
- การสั่งซื้อสินค้าช่วงโควิท19
- hydraulic piston sealing elements
- oilseal
- piston seal
- das
- vee pack
- k35
- c-hpu
- c-hpu96
- h - ecopur
- machined seal material
- k16
- k703
- k36
- bore tape 50-300mm
- bore tape 50-1400mm (2”- 55”)
- bore tape 50-1400mm
- bore tape 50-700mm
- kastas k43
- k43
- k34
- k31
- kastas k31
- k58
- pneumatic piston sealing
- kastas k33
- k33
- k05
- k42
- kastas k42
- type of oilseal
- ชนิด oilseal
- machined plastic parts
- pe300
- nylon (pa6)
- ด้ามทุบน้ำแข็ง
- hallite 601
- hallite 605
- hallite 839











