Seal Raw material
NBR :Acrylonitrile Butadiene Rubber |
Hardness : 85 Shore A (+-2)
Temperature range : -30°C to +100°C
Application :All standard hydraulic conditions (up to 250 bar)
EPDM :Ethylene Propylene Diene Rubber |
Hardness : 85 Shore A (+-2)
Temperature range : -50°C to +150°C
Application : Hot water, steam and Dilute Acid.
VITON :FPM Fluorocarbon Rubber |
Hardness : 85 Shore A (+-2)
Temperature range : -20°C to +210°C
Application :All standard hydraulic conditions (up to 250 bar)
H-PU :Hydrolysis-resistant thermoplastic polyurethane elastomer |
Hardness : 95 Shore A (+-2)
Temperature range : -35°C to +110°C
Application :All standard hydraulic conditions.
H-ECOPUR :Thermoplastic Polyurethane Elastomer (TPU) - hydrolysis resistant - 95A |
Hardness :95 Shore A (+-2) | 48 Shore D (+-3)
Temperature range : -20°C to +110°C
Application :Mineral oil, in water and in bio- degradable hydraulic oils like vegetable oils and synthetic esters food-beverage and healthcare.
*H-ECOPUR is approved and meets the FDA standards.
POM :Polyoxymethelene or Polyacetal |
Hardness :85 Shore D
Temperature range : -60°C to +100°C
Application :Guide rings, Back up rings.
CAST NYLON:PA Polyamide |
Hardness :85 Shore D
Temperature range : -40°C to +105°C
Application :Guide rings, Back up rings.
