Language
Cart

Page 6 - Hydraulic Seal

  1. Hallite 155 for Bore Sealing Applications
    26
    May

    Hallite 155 for Bore Sealing Applications

    The Hallite 155 U-ring static seal designed to seal the joint between the gland and the cylinder bore. The Hallite 155 replaces the conventional O-ring and back-up ring combination.

    Through its special design and polyester material compound, the seal will work with a maximum extrusion gap of 0.40 mm at 500 bar pressure.

    Every nominal diameter of the Hallite 155 is suitable for a range of bore diameters, ØD₁. See part number range for details.

    This seal was developed for water-based, HFA, applications, but can also be used with standard mineral oil fluids.

    Read more
  2. Hallite 653 ROD BUFFER SEAL
    26
    May

    Hallite 653 ROD BUFFER SEAL

    The Hallite 653 single-acting rod buffer seal is designed to be used in conjunction with a high-performance rod seal, such as the Hallite 605 and 621, to protect the primary seal from shock pressure loading and high frequency pressure spikes in the hydraulic system. The design allows oil to pass through to the rod seal while holding back pressure spikes. The Hallite 653 is a patented product (European patent no. 0427554BI; U.S.A. patent no. 5088747) that also allows pressure to pass back into the system preventing a pressure trap between the rod seal and the buffer seal. The Hallite 653 is an excellent pressure buffer option in heavy-duty applications and offers extended sealing system life and performance.

    Read more
  3. Hallite 13 Vee Pack Rod Seal for heavy duty applications
    26
    May

    Hallite 13 Vee Pack Rod Seal for heavy duty applications

    The Hallite 13 is a Vee pack rod seal for heavy duty applications offering excellent performance and long life even under difficult operating conditions such as pressure surges, vibration and some misalignment. The seal assembly consists of a male and female adaptor and 5 vee rings.

    The male adaptor is usually manufactured form polyacetal but some of the larger sizes use rubberised fabric. It has grooves across one face to ensure equal pressure to the sealing edges of the vee ring.

    All sizes have vee rings manufactured from rubberised fabric because this has strength and durability and permits an oil film to lubricate the other parts of the seal. Some sizes are supplied with rubber vee rings between the rubberised fabric vee rings.

    The female adaptor uses a hard rubberised fabric to support the vee rings and protect them from extrusion damage. At high pressure the lips of the adaptor act as a secondary seal.

    Read more
  4. Hallite 11 Vee Pack Rod Seal
    26
    May

    Hallite 11 Vee Pack Rod Seal

    The Hallite 11 is a vee pack rod seal for medium duty applications offering excellent performance and long life even under difficult operating conditions such as pressure surges, vibration and some misalignment. The seal consists of a male and female adaptor and 5 vee rings. The male adaptor is usually manufactured from polyacetal but some of the larger sizes use rubberised fabric. It has grooves across one face to ensure equal pressure to the sealing edges of the vee ring.

    All sizes have three rings manufactured from rubberised fabric because this has strength and durability and permits an oil film to lubricate the other parts of the seal. Two rubber vee rings are supplied between the rubberised fabric vee rings (up to and including 140mm diameter) to aid low pressure sealing.

    The female adapter uses a hard rubberised fabric to support the vee rings and protect them from extrusion damage. At high pressure the lips of the adaptor acts as a secondary seal.

    The proportions of the range have been determined to give a satisfactory performance when used with the recommended operating conditions.

    Read more
  5. Hallite 862 WIPER
    25
    May

    Hallite 862 WIPER

    DESIGN
    The Hallite 862 single-lipped, metal-cased wiper is designed to press fit into open groove housings for a wide range of applications. The precision trimmed polyurethane wiping element is securely bonded to a metal case treated to inhibit rust. The proportions of the polyurethane wiping lip follow the side movement of the rod to clear away heavily deposited dirt and make this wiper an excellent choice for dirty conditions. The Hallite 862 is offered in a range of sizes suitable for standard American inch wiper housings.

    Read more
  6. Hallite 65 Double Acting Seal
    25
    May

    Hallite 65 Double Acting Seal

    Ideal for light duty one piece piston applications, the Hallite 65 double acting seal is a simple, effective and economical design for pressures up to 160 bar/2500 p.s.i. its compact dimensions enable the designer to keep the length of the piston to a minimum. It is an assembly of a continuous rubber seal and two scarf cut bearings. The nitrile rubber seal is designed to be pre-loaded by the housing to ensure an effective seal at low pressure. The outward thrust of the rubber seal on the bearings as it reacts to increasing pressure prevents any extrusion damage in the sealing area. The polyacetal bearings are proportioned to support the piston and its side load.

    Read more
  7. Hallite 616 ROD SEAL
    25
    May

    Hallite 616 ROD SEAL

    Hallite’s 616 is a compact, asymmetric twin lip rod seal offering excellent dry rod sealing for light and medium-duty applications where space and friction are at a premium. The seal is manufactured in Hythane® 181, Hallite’s high-performance polyurethane, for easy installation and excellent low temperature performance.

    The Hallite 616 design incorporates the sealing efficiency of the Hallite 605 rod seal with the compact grooves used by PTFE rod seals.

    Hallite recommends using our 616 rod seal as either a single seal or in combination with the Hallite R16 PTFE rod seal. The combination is recommended for use in applications where pressure peaks may occur, such as cylinders with cushioning.

    The Hallite R16 PTFE rod seal is fitted into the groove on the pressure side of the gland and the Hallite 616 is used as the secondary seal to ensure minimal leakage. Consult your local Hallite office when considering this arrangement.

    Read more
  8. Hallite 753
    25
    May

    Hallite 753

    Design
    The Hallite 753 is a compact assembly designed and developed specifically for one piece pistons.The assembly comprises a wear-resistant polyurethane slip ring which is loaded by an NBR ring. There are split 'L'shaped anti-extrusion bearings made from polyacetal resin on both sides of the seal.The proportions of the range have been determined to give a satisfactory performance when used with the recommended operating conditions.Hallite 753 is manufactured using two different profiles as illustrated below. The parts list clearly indicates which profile is used for each size.

    Read more
  9. 521 WIPER Single-Lipped Designed for AN Style Housings
    25
    May

    521 WIPER Single-Lipped Designed for AN Style Housings

    521 WIPER Single-Lipped Designed for AN Style Housings

    DESIGN
    The Hallite 521 snap-in rod wiper is designed for light-duty applications and to fit typical AN housings. The proportions of the wiping lip ensure that contact is maintained with the surface of the rod to remove contaminants. The Hallite 521 is available in wide range of Hythane® polyurethanes and polyester materials to best suit your application needs.

    Read more
  10. Hallite 860 WIPER Single-Lipped Polyurethane, Metal-Cased
    25
    May

    Hallite 860 WIPER Single-Lipped Polyurethane, Metal-Cased

    DESIGN
    The Hallite 860 single-lipped, metal-cased wiper is designed to press fit into open groove housings for a wide range of applications. The precision trimmed polyurethane wiping element is securely bonded to a metal case treated to inhibit rust. The proportions of the polyurethane wiping lip follow the side movement of the rod to clear away heavily deposited dirt and make this wiper an excellent choice for dirty conditions. The Hallite 860 is offered in a range of sizes suitable for ISO 6195 Type B housings and also for standard Asian housings.

    Read more
Posts loader