Hydraulic Piston Sealing Elements / K42
Hydraulic Piston Sealing Elements / K42
PRODUCT ADVANTAGES
• Effective sealing during vibration and shock loading
• Superior sealing efeect in high pressures
• Maximum sealing effciency with the least amount of friction
• Superior sealing performance
APPLICATION
Heavy duty cylinders , excavators , cranes , marine hydraulics and loading platforms.
|
||||||||||||||||||||
|
||||||||||||||||||||
| SURFACE ROUGHNESS | Ra | Rmax |
| Sliding Surface ØD | ≤0.4 μm | ≤4.0 μm |
| Groove Base Ød | ≤1.6 μm | ≤6.3 μm |
| Groove Flanks B | ≤3.2 μm | ≤16 μm |
| Note: It is recommended to have 50% to 90% of the working surface material contact area value. | ||
INSTALLATION
K42 compact seal must be used in open housing due to the non split form of the back-up ring produced from TPE material. If it is necessary to have a closed groove , back-up rings should be cut with 45° angle in a way not to have any gap and installed afterwards. On this case after the assembly onto the piston the cut on the back-up ring should be checked carefully. It is very important that the assembly tools must be of soft material and have no sharp edges. Before installation the sealing element must be oiled with system oil.
สอบถามข้อมูลเพิ่มเติมหรือสั่งซื้อสินค้าได้ที่
บริษัท อีโคซีล จำกัด
Facebook : @ecosealthailand
Line Official : @ecosealthailand
Website: www.ecosealthailand.com
E-mail : [email protected]
Tel : 02 931 6868
