K95 HYDRAULIC ROD/PISTON SEAL

K95 is a single acting piston - rod seal and designed to have symmetrical lips in order to be used both for rod and piston applications.

PRODUCT ADVANTAGES
• Superior static and dynamic sealing efect
• Wide range of dimensions
• Easy assembly into closed grooves
• Although designed for hydraulic cylinders , it is used in special pneumatic cylinders as well
• Simple groove design
• Economical sealing solution

APPLICATION
Fork-lift trucks , injection moulding machines , agricultural machinery , and standard cylinders.

MATERIAL		CODE
NBR	90 SHORE A	NB^₉₀₀₁

OPERATING CONDITIONS

MEDIUM

Mineral oils(DIN 51524)

HFA and HFB

HFC

TEMPERATURE

-30°C +105°C

+5°C +60°C

-30°C +60°C

PRESSURE

≤150 Bar

SPEED

≤0.5 m/sn

Note: The above data are maximum values and cannot be used at the same time.

SURFACE ROUGHNESS

Ra

Rmax

Sliding Surface ØD-Ød

≤0.4 μm

≤3.2 μm

Groove Base ØDb-Ødp

≤1.6 μm

≤10 μm

Groove Flanks B

≤3.2 μm

≤16 μm

Note: It is recommended to have 50% to 90% of the working surface material contact area value.

INSTALLATION
Easily assembled into closed grooves according to the minimum diameter values that are given in the below table. Open grooves or special assembly tools should be used for the values that are outside this table. Before installation the sealing element must be oiled with system oil.

MINUMUM DIAMETER VALUES FOR CLOSED TYPE OF GROOVES

(D-d)/2 (mm)	4	5	6	7.7	10	12.5	15
dmin (mm)	25	30	40	50	80	100	105

NOTES
For special applications that require high temperatures , K95 can be produced in FKM material. The permissible sealing gap values of K95 piston - rod seal is given in the below table.

PERMISSIBLE SEALING GAP

	Smax (mm)
t=(D-d)/2	50 Bar	100 Bar	150 Bar
t≤5	0.40	0.20	0.10
t>5	0.45	0.25	0.15

Note: The largest sealing gap value occurring on the non-pressurized side of the seal does have a vital importance for the function of the seal and in this respect it is quite important to use the S value lower than the above indicated numbers.

More Information
Application หรือ MEDIA ที่เหมาะกับการใช้งานใช้งาน	Fork-lift trucks , injection moulding machines , agricultural machinery , and standard cylinders.
Temperature Range Min °C	-30
Temperature Range Max °C	105
Max Pressure	150 bar
หน่วย	PCE
หน่วยวัด	mm
แบรนด์	Kastas
Type	K95
วัสดุ(Material)	NBR


	ชื่อสินค้า	ราคา	จำนวน	ID	OD	Thickness	Thickness2	Type	Part NO	Material
No options of this product are available.

Account

Account

เพื่อความสะดวกในการค้นหาสินค้า ลูกค้า สามารถกรอกข้อมูล ในช่องต่างๆ ได้ทันที