Language
Thai
โทร : 66(0)2 931 6868 อีเมล : ecoseal@ecosealthailand.com

Cart
หมวดหมู่ทั้งหมด

K95 is a single acting piston - rod seal and designed to have symmetrical lips in order to be used both for rod and piston applications.

PRODUCT ADVANTAGES
• Superior static and dynamic sealing efect
• Wide range of dimensions
• Easy assembly into closed grooves
• Although designed for hydraulic cylinders , it is used in special pneumatic cylinders as well
• Simple groove design
• Economical sealing solution

APPLICATION
Fork-lift trucks , injection moulding machines , agricultural machinery , and standard cylinders.
MATERIAL   CODE
NBR 90 SHORE A NB9001
OPERATING CONDITIONS
MEDIUM Mineral oils(DIN 51524)  HFA and HFB HFC
TEMPERATURE -30°C +105°C +5°C +60°C -30°C +60°C
PRESSURE ≤150 Bar ≤150 Bar ≤150 Bar
SPEED ≤0.5 m/sn ≤0.5 m/sn ≤0.5 m/sn
Note: The above data are maximum values and cannot be used at the same time.
    
SURFACE ROUGHNESS Ra Rmax
Sliding Surface ØD-Ød ≤0.4 μm ≤3.2 μm
Groove Base ØDb-Ødp ≤1.6 μm ≤10 μm
Groove Flanks B ≤3.2 μm ≤16 μm
Note: It is recommended to have 50% to 90% of the working surface material contact area value.

INSTALLATION
Easily assembled into closed grooves according to the minimum diameter values that are given in the below table. Open grooves or special assembly tools should be used for the values that are outside this table. Before installation the sealing element must be oiled with system oil.
 
MINUMUM DIAMETER VALUES FOR CLOSED TYPE OF GROOVES
(D-d)/2 (mm) 4 5 6 7.7 10 12.5 15
dmin (mm) 25 30 40 50 80 100 105

NOTES
For special applications that require high temperatures , K95 can be produced in FKM material. The permissible sealing gap values of K95 piston - rod seal is given in the below table.

PERMISSIBLE SEALING GAP
   Smax (mm)
t=(D-d)/2 50 Bar 100 Bar 150 Bar
t≤5 0.40 0.20 0.10
t>5  0.45 0.25 0.15
Note: The largest sealing gap value occurring on the non-pressurized side of the seal does have a vital importance for the function of the seal and in this respect it is quite important to use the S value lower than the above indicated numbers.
More Information
น้ำหนัก/หน่วย (กก.)0.1000
Application หรือ MEDIA ที่เหมาะกับการใช้งานใช้งานFork-lift trucks , injection moulding machines , agricultural machinery , and standard cylinders.
Temperature Range Min °C-30
Temperature Range Max °C105
Max Pressure150 bar
หน่วยPCE
หน่วยวัดmm
แบรนด์Kastas
I.D. เส้นผ่านศูนย์กลางวงใน3
OD เส้นผ่านศูนย์กลางวงนอก(มม)7
THK ความหนา5
TypeK95
Part NOK95-003
วัสดุ(Material)NBR
Write Your Own Review
You're reviewing:K95 3X7X5
Your Rating
มีสินค้า
SKU
HS-RP-3137
฿54.00
เพิ่มลงใน รายการสิ่งที่ชอบ เพิ่มลงในการเปรียบเทียบ
อีเมล
กำลังโหลด...

K95 3X7X5

Be the first to review this product

Hydraulic Piston - Rod Sealing Elements / K95

สอบถามสั่งซื้อสินค้า
บริษัท อีโคซีล จำกัด

Facebook : @ecosealthailand
Line Official : @ecosealthailand
Website: www.ecosealthailand.com
E-mail : ecoseal@ecosealthailand.com
Tel : 02-931-6868-71