K58 PISTON 50X10.1X15.5

K58 is five piece double acting sealing set consists of aluminumbody , two elastomeric sealing elements , one guide ring , onemagnet and an O-ring for the inner sealing.

PRODUCT ADVANTAGES
• Ready to fit complete piston
• Low friction and smooth running due to sealing lip geometry
• Easily fastened to the piston rod without using additionalsealing elements
• Static seal on the inside diameter
• Easy installation
• Long service life

APPLICATION
All pneumatic cylinders in need of stroke control.

MATERIAL		CODE
PU	92 SHORE A	PU^₉₂₀₁
POM		PM_⁹⁹⁰¹
ALUMINUM		AL_⁹⁹⁰¹
MAGNET		MK_⁹⁹⁰¹
NBR	70 SHORE A	NB_⁷⁰⁰¹

OPERATING CONDITIONS
MEDIA	Prepared , dried and de-oiled compressed air
TEMPERATURE	-30°C +80 °C
PRESSURE	≤16 Bar
SPEED	≤1.0 m/sn

Note: The above data are maximum values and cannot be usedat the same time.

SURFACE ROUGHNESS	Rmax
Sliding Surface	≤4 μm
INSTALLATION K58 is pushed onto the piston rod on the clamping flange towards the rod and fixed by fastening. The nut has to be secured. The sliding surface and the cylinder bore should be oiled with oil that must not go into the reaction with the sealing element during the installation process. NOTES For special applications that require high temperatures , K58 can be produced in FKM material.

More Information
น้ำหนัก/หน่วย (กก.)	0.2000
Application หรือ MEDIA ที่เหมาะกับการใช้งานใช้งาน	All pneumatic cylinders in need of stroke control.
Temperature Range Min °C	-30
Temperature Range Max °C	80
Max Pressure	16 bar
หน่วยวัด	mm
แบรนด์	Kastas
Part NO	K58-050
OD เส้นผ่านศูนย์กลางวงนอก(มม)	50
I.D. เส้นผ่านศูนย์กลางวงใน	10.1
THK ความหนา	15.5
วัสดุ(Material)	NBR, PU, POM-C, ALUMINUM, MAGNET
Type	K58 PISTON

Account

Account

K58 PISTON 50X10.1X15.5

Pneumatic Piston Sealing Elements / K58

สอบถามสั่งซื้อสินค้า

บริษัท อีโคซีล จำกัด

ข้อมูล

บริการลูกค้า

ช่วยเหลือ-เพิ่มเติม

บัญชีของฉัน