K56 COMBI 12X22X10.4

K56 is a two piece single acting pneumatic rod seal which consists of one nitrile rubber sealing element and one polyester elastomer scrapper profile ring.

PRODUCT ADVANTAGES
• Good scrapping with special geometry and material
• High resistance to operating temperature changes
• Superior sealing effect
• Low static and dynamic friction values

APPLICATION
Pneumatic cylinders.

MATERIAL		CODE
NBR	80 SHORE A	NB^₇₀₀₁
TPE	55 SHORE D	TP_⁵⁵⁰¹

OPERATING CONDITIONS
MEDIA	Prepared , dried and de-oiled compressed air
TEMPERATURE	-30°C +105 °C
PRESSURE	≤16 Bar
SPEED	≤1.0 m/sn

Note: The above data are maximum values and cannot be used at the same time.

SURFACE ROUGHNESS	Rmax
Sliding Surface Ød	≤4 μm
Groove Base ØD	≤10 μm
Groove Flanks B1	≤15 μm
INSTALLATION It can be assembled into closed groove with tight hand force. K56 does not need additional element such as circlip for axial fitting within the housing. We recommend using special assembly tool. It is very important that the assembly tools must be of soft material and have no sharp edges. Before installation the rod seal must be oiled with system oil. NOTES For special applications that require high temperatures , K56 can be produced in combination of FKM and PTFE material.

More Information
น้ำหนัก/หน่วย (กก.)	0.1000
Application หรือ MEDIA ที่เหมาะกับการใช้งานใช้งาน	Pneumatic cylinders.
Temperature Range Min °C	-30
Temperature Range Max °C	105
Max Pressure	16 bar
หน่วยวัด	mm
หน่วย	PCE
แบรนด์	Kastas
Part NO	K56-012
OD เส้นผ่านศูนย์กลางวงนอก(มม)	22
I.D. เส้นผ่านศูนย์กลางวงใน	12
THK ความหนา	10.4
วัสดุ(Material)	NBR
Type	K56 COMBI

Account

Account

K56 COMBI 12X22X10.4

สอบถามสั่งซื้อสินค้า

บริษัท อีโคซีล จำกัด

ข้อมูล

บริการลูกค้า

ช่วยเหลือ-เพิ่มเติม

บัญชีของฉัน