Language

Cart

 

K50 is a single acting pneumatic piston seal designed to have asymmetrical profile with shorter and thinner dynamic lip

PRODUCT ADVANTAGES
• Secure seating due to the longer and thicker static sealing lip
• Low friction and good sealing performance due to the seal geometry
• Wide range of dimensions
• Simple groove design

APPLICATION
Standard pneumatic cylinders.

MATERIAL   CODE
NBR 80 SHORE A NB8001
PU 80 SHORE A  PU8502
OPERATING CONDITIONS
NBR
MEDIA Prepared , dried and de-oiled compressed air
TEMPERATURE -30°C +105 °C
PRESSURE ≤12 Bar
SPEED ≤1.0 m/sn
PU
MEDIA Prepared , dried and de-oiled compressed air
TEMPERATURE -30°C +80 °C
PRESSURE ≤16 Bar
SPEED ≤1.0 m/sn
Note: The above data are maximum values and cannot be used at the same time.
    
SURFACE ROUGHNESS Rmax
Sliding Surface  ØD ≤0.4 μm
Groove Base  Ød ≤10 μm
Groove Flanks B ≤15 μm

INSTALLATION
K50 can be snapped by hand into the housing grooves provided. In case of using an assembly tools make sure that it is of soft material and have no sharp edges. Before installation the sealing element must be oiled with system oil. Special lubrication should be used on the sliding surface in case of having dried media.

NOTES
For special applications that require high temperatures , K50 can be produced in FKM material. We recommend using guide ring or guide rings with K50 piston seal.

More Information
น้ำหนัก/หน่วย (กก.)0.1000
Application หรือ MEDIA ที่เหมาะกับการใช้งานใช้งานStandard pneumatic cylinders.
Temperature Range Min °C-30
Temperature Range Max °C80
Max Pressure16 Bar
หน่วยวัดmm
แบรนด์Kastas
OD เส้นผ่านศูนย์กลางวงนอก(มม)160
I.D. เส้นผ่านศูนย์กลางวงใน140
THK ความหนา8.25
TypeK50 PISTON
Part NOK50-160/1 PU
วัสดุ(Material)PU
Write Your Own Review
You're reviewing:K50 PISTON 160X140X8.25 PU
Your Rating
มีสินค้า
SKU
PN-PS-0058
฿335.00

K50 PISTON 160X140X8.25 PU

 

Pneumatic Piston Sealing Elements / K50

สอบถามสั่งซื้อสินค้า
บริษัท อีโคซีล จำกัด

Facebook : @ecosealthailand
Line Official : @ecosealthailand
Website: www.ecosealthailand.com
E-mail : [email protected]

Tel : 02 931 6868-71