K36 Hydraulic Rod Seal

K36 is a single acting piston - rod seal which consists of reinforced cotton fabric and nitrile rubber vulcanized together forming an integral sealing element.

PRODUCT ADVANTAGES
• Functions even with poor surfaces
• Reinforced cotton fabric base prevents the seal from extrusion
• Both rod and piston application
• Good sealing at low pressures

APPLICATION
Low to medium duty hydraulic cylinders , mobile hydraulics and presses.

MATERIAL		CODE
NBR	80 SHORE A	NB_⁸⁸⁰¹
COTTON FABRIC NBR		NB^₈₀₀₄

OPERATING CONDITIONS

MEDIA

Mineral oils (DIN 51524)

HFA ve HFB

HFC

TEMPERATURE

-30°C +105°C

+5°C +60°C

-30°C +60°C

PRESSURE

≤250 Bar

SPEED

≤0.5 m/sn

Note: The above data are maximum values and cannot be used at the same time.

SURFACE ROUGHNESS	Ra	Rmax
Sliding Surface ØD-Ød	≤0.4 μm	≤3.2 μm
Groove Base Ødp - ØDb	≤1.8 μm	≤6.3 μm
Groove Flanks B	≤3.2 μm	≤16 μm
Note: It is recommended to have 50% to 90% of the working surface material contact area value.
INSTALLATION K36 is to be assembled into open grooves. It is very important that the assembly tools must be of soft material and have no sharp edges. Before installation the sealing element must be oiled with system oil. NOTES The permissible sealing gap values of K36 piston - rod seal is given in the below table.

PERMISSIBLE SEALING GAP

Pressure(Bar)	S (mm)
150	0.2
250	0.1

Note: The largest sealing gap value occurring on the non-pressurized side of the seal does have a vital importance for the function of the seal and in this respect it is quite important to use the S value lower than the above indicated numbers.

More Information
Type	K36 PISTON-ROD
วัสดุ(Material)	NBR


ชื่อสินค้า	ราคา	จำนวน	ID	OD	Thickness	Thickness2	Type	Part NO	Material
K36 PISTON - ROD SEAL 18X26X6.3 NBR	฿79.00		18	26	6.3	-	K36 PISTON-ROD	K36-018	NBR
K36 PISTON - ROD SEAL 65X77X9.6 NBR	฿176.00		65	77	9.6	-	K36 PISTON-ROD	K36-065/1	NBR
K36 PISTON - ROD SEAL 70X80X7.5 NBR	฿180.00		70	80	7.5	-	K36 PISTON-ROD	K36-070	NBR
K36 PISTON - ROD SEAL 35X45X8 NBR	฿123.00		35	45	8	-	K36 PISTON-ROD	K36-035/1	NBR
K36 PISTON - ROD SEAL 110X125X12 NBR	฿285.00		110	125	12	-	K36 PISTON-ROD	K36-110	NBR
K36 PISTON - ROD SEAL 90X110X12.5 NBR	฿278.00		90	110	12.5	-	K36 PISTON-ROD	K36-090/1	NBR
K36 PISTON - ROD SEAL 50X60X7.5 NBR	฿138.00		50	60	7.5	-	K36 PISTON-ROD	K36-050/1	NBR
K36 PISTON - ROD SEAL 20X28X6.3 NBR	฿79.00		20	28	6.3	-	K36 PISTON-ROD	K36-020	NBR
K36 PISTON - ROD SEAL 36X44X6.3 NBR	฿125.00		44	36	6.3	-	K36 PISTON-ROD	K36-036	NBR
K36 PISTON - ROD SEAL 70X82X9.6 NBR	฿180.00		70	82	9.6	-	K36 PISTON-ROD	K36-070/1	NBR
K36 PISTON - ROD SEAL 40X48X6.5 NBR	฿130.00		40	48	6.5	-	K36 PISTON-ROD	K36-040/4	NBR
K36 PISTON - ROD SEAL 14X22X6.3 NBR	฿79.00		14	22	6.3	-	K36 PISTON-ROD	K36-014	NBR
K36 PISTON - ROD SEAL 60X72X10 NBR	฿160.00		60	72	10	-	K36 PISTON-ROD	K36-060/4	NBR
K36 PISTON - ROD SEAL 55X65X8 NBR	฿143.00		55	65	8	-	K36 PISTON-ROD	K36-055	NBR
K36 PISTON - ROD SEAL 25X35X8.3 NBR	฿96.00		25	35	8.3	-	K36 PISTON-ROD	K36-025/3	NBR
K36 PISTON - ROD SEAL 70X85X8 NBR	฿216.00		70	85	8	-	K36 PISTON-ROD	K36-070/4	NBR
K36 PISTON - ROD SEAL 40X50X8 NBR	฿130.00		40	50	8	-	K36 PISTON-ROD	K36-040/1	NBR
K36 PISTON - ROD SEAL 16X24X6.3 NBR	฿79.00	สินค้าหมด	16	24	6.3	-	K36 PISTON-ROD	K36-016	NBR
K36 PISTON - ROD SEAL 90X102X9.6 NBR	฿230.00		90	102	9.6	-	K36 PISTON-ROD	K36-090	NBR
K36 PISTON - ROD SEAL 60X70X7.5 NBR	฿152.00		60	70	7.5	-	K36 PISTON-ROD	K36-060/1	NBR
K36 PISTON - ROD SEAL 30X40X6.3 NBR	฿112.00		30	40	6.3	-	K36 PISTON-ROD	K36-030/2	NBR
K36 PISTON - ROD SEAL 100X115X12 NBR	฿280.00		100	115	12	-	K36 PISTON-ROD	K36-100	NBR
K36 PISTON - ROD SEAL 80X96X10 NBR	฿220.00		80	96	10	-	K36 PISTON-ROD	K36-080/1	NBR
K36 PISTON - ROD SEAL 45X55X8 NBR	฿130.00		45	55	8	-	K36 PISTON-ROD	K36-045/1	NBR

Account

Account

เพื่อความสะดวกในการค้นหาสินค้า ลูกค้า สามารถกรอกข้อมูล ในช่องต่างๆ ได้ทันที