K30 WIPER 30X40X7/9.5 NBR

K30 is a single acting wiper seal combination which consists of a metal vulcanized with elastomeric nitrile rubber using special production methods.

PRODUCT ADVANTAGES
• Superior wiping effect
• Superior sealing effect
• Wide range of dimensions
• Able to work in hard conditions
• Good adjustment to temperature changes due to the metal ring

APPLICATION
Pneumatic cylinders.

MATERIAL		CODE
NBR	70 SHORE A	NB^₇₀₀₁
STEEL	ST37	FE^₉₉₀₁

OPERATING CONDITIONS

MEDIA

Prepared , dried and de-oiled compressed air

TEMPERATURE

-30°C +105°C

PRESSURE

≤16 Bar

SPEED

≤1.0 m/sn

Note: The above data are maximum values and cannot be used at the same time.

SURFACE ROUGHNESS	Rmax
Sliding Surface Ød	≤4 μm
Groove Base ØD2	≤10 μm
Groove FlanksS1	≤15 μm
INSTALLATION K30 wiper/seal is fitted into the housing by means of a circlip recess. The sealing part is pushed in and fixed by the circlip. It is very important that the assembly tools must be of soft material and have no sharp edges. Before installation the sealing element must be oiled with system oil. NOTES For special applications that require high temperatures , K30 can be produced in FKM material.

More Information
น้ำหนัก/หน่วย (กก.)	0.1000
Application หรือ MEDIA ที่เหมาะกับการใช้งานใช้งาน	Pneumatic cylinders.
Temperature Range Min °C	-30
Temperature Range Max °C	105
Max Pressure	16 bar
หน่วยวัด	mm
หน่วย	PCE
แบรนด์	Kastas
Part NO	K30-030
OD เส้นผ่านศูนย์กลางวงนอก(มม)	40
I.D. เส้นผ่านศูนย์กลางวงใน	30
THK ความหนา	7
วัสดุ(Material)	NBR
Type	K30 - PNEUMATIC ROD SEAL

Account

Account