Language

Cart

K26 is a double acting complete piston seal which consists of a steel plate vulcanized with elastomeric nitrile rubber using special production methods. The sealing lips do have springs in order to increase the preload.

PRODUCT ADVANTAGES
• Good sealing performance at low pressures due to the reason having spring on the sealing lips
• Long service life
• Ready to fit complete piston
• Also used in pneumatic systems

APPLICATION
Short stroke , low pressure hydraulic cylinder and special pneumatic cylinders.

MATERIAL   CODE
NBR 90 SHORE A NB9001
STEEL  ST 37 FE9901
STAINLESS STEEL SPRING   CN9901
OPERATING CONDITIONS
MEDIA Mineral oils (DIN 51524)  HFA ve HFB HFC Compressed
Air
TEMPERATURE -30°C +105°C +5°C +60°C -30°C +60°C -30°C +105°C
PRESSURE Diagram 1 Diagram 1 Diagram 1  
SPEED ≤0.5 m/sn ≤0.5 m/sn ≤0.5 m/sn  
Note: The above data are maximum values and cannot be used at the same time.
    
SURFACE ROUGHNESS Ra Rmax
Sliding Surface ØD ≤0.2 μm ≤2.0 μm
Note: It is recommended to have 50% to 90% of the working surface material contact area value.

INSTALLATION
K26 is pushed onto the piston rod with the rubber layer on the clamping flange towards the rod and fixed by fastening. The nut has to be secured. The sliding surface and the cylinder bore should be oiled with an oil that must not go into the reaction with the sealing element during the installation process. Special precautions has to be taken at the end of the stokes to avoid damaging of the sealing lips.

NOTES
For special applications that require high temperatures , K26 can be produced in FKM material.

More Information
น้ำหนัก/หน่วย (กก.)0.1000
Application หรือ MEDIA ที่เหมาะกับการใช้งานใช้งานShort stroke , low pressure hydraulic cylinder and special pneumatic cylinders.
Temperature Range Min °C-30
Temperature Range Max °C105
หน่วยวัดmm
แบรนด์Kastas
I.D. เส้นผ่านศูนย์กลางวงใน8
OD เส้นผ่านศูนย์กลางวงนอก(มม)26
THK ความหนา22
TypeK26 PISTON
Part NOK26-026 S
วัสดุ(Material)NBR
Write Your Own Review
You're reviewing:K26 PISTON 26X8X22
Your Rating
มีสินค้า
SKU
HS-PS-0063
฿112.00

K26 PISTON 26X8X22

Hydraulic Piston Sealing Elements / K26

สอบถามสั่งซื้อสินค้า

บริษัท อีโคซีล จำกัด

Facebook : @ecosealthailand
Line Official : @ecosealthailand
Website: www.ecosealthailand.com
E-mail : ecoseal@ecosealthailand.com

Tel : 02 931 6868