Language

Cart

K25 is a double acting complete piston seal which consists of a steel plate vulcanized with elastomeric nitrile rubber using special production methods.

PRODUCT ADVANTAGES
• Ready to fit complete piston
• Wide range of dimensions
• Low friction and smooth running due to sealing lip geometry
• Easily fastened to the piston rod without using additional sealing elements
• Long service life
• Economical sealing solution

APPLICATION
Iron and aluminum pneumatic cylinders.

MATERIAL   CODE
NBR 75 SHORE A NB7501
STEEL  ST37 FE9901
MEDIA Prepared , dried and de-oiled compressed air
TEMPERATURE -30°C +105°C
PRESSURE ≤16 Bar
SPEED ≤1.0 m/sn
Note: The above data are maximum values and cannot be used at the same time.
   
SURFACE ROUGHNESS   Rmax
Sliding Surface  ØD ≤0.4 μm ≤3.2 μm

INSTALLATION
K25 is pushed onto the piston rod on the clamping flange towards the rod and fixed by fastening. The nut has to be secured. The sliding surface and the cylinder bore should be oiled with oil that must not go into the reaction with the sealing element during the installation process. Special precautions has to be taken at the end of the stokes to avoid damaging of the sealing lips.

NOTES
For special applications that require high temperatures , K25 can be produced in FKM material.

More Information
น้ำหนัก/หน่วย (กก.)0.1000
Application หรือ MEDIA ที่เหมาะกับการใช้งานใช้งานIron and aluminum pneumatic cylinders.
Temperature Range Min °C-30
Temperature Range Max °C105
Max Pressure16
หน่วยวัดmm
แบรนด์Kastas
Part NOK25-063
OD เส้นผ่านศูนย์กลางวงนอก(มม)63
I.D. เส้นผ่านศูนย์กลางวงใน12
THK ความหนา22
วัสดุ(Material)NBR
TypeK25 PISTON
Write Your Own Review
You're reviewing:K25 PISTON 63X12X22 NBR
Your Rating
มีสินค้า
SKU
PN-PS-0041
฿185.00

K25 PISTON 63X12X22 NBR

Pneumatic Piston Sealing Elements / K25

สอบถามสั่งซื้อสินค้า
บริษัท อีโคซีล จำกัด

Facebook : @ecosealthailand
Line Official : @ecosealthailand
Website: www.ecosealthailand.com
E-mail : ecoseal@ecosealthailand.com

Tel : 02 931 6868-71