K18 COMPACT SET 57.15X41.27X19.45

K18 is a five piece double acting compact seal which consists of one elastomeric nitrile rubber sealing element , two polyester elastomer back-up rings on both sides to prevent extrusion into the sealing gap and two special profiled guide rings produced from thermoplastic to absorb transverse forces.

PRODUCT ADVANTAGES
• Superior sealing performance
• Economic sealing and guiding solution
• Simple groove design , one-piece piston possible
• Long service life
• Simple snap installation

APPLICATION
Construction machinery , fork-lift trucks , injection moulding machines , agricultural machinery , cranes and standard cylinders.

MATERIAL		CODE
NBR	80 SHORE A	NB^₈₀₀₁
TPE		TP^₇₃₀₁
POM		PM^₉₉₀₁

OPERATING CONDITIONS

MEDIA

Mineral oils (DIN 51524)

HFA and HFB

HFC

TEMPERATURE

-30°C +105°C

+5°C +60°C

-30°C +60°C

PRESSURE

≤400 Bar

SPEED

≤0.5 m/sn

Note: The above data are maximum values and cannot be used at the same time.

SURFACE ROUGHNESS	Ra	Rmax
Sliding Surface ØD	≤0.4 μm	≤4.0 μm
Groove Base Ød	≤1.6 μm	≤6.3 μm
Groove Flanks B	≤3.2 μm	≤16 μm
Note: It is recommended to have 50% to 90% of the working surface material contact area value.
INSTALLATION Easily assembled into one-piece piston because the back-up rings and guide rings are been produced in split forms. It is very important that the assembly tools must be of soft material and have no sharp edges. Before installation the sealing element must be oiled with system oil.
NOTES For special applications that require high temperatures , piston seal is manufactured in FKM and PTFE material.

More Information
น้ำหนัก/หน่วย (กก.)	0.1000
Application หรือ MEDIA ที่เหมาะกับการใช้งานใช้งาน	Construction machinery , fork-lift trucks , injection moulding machines , agricultural machinery , cranes and standard cylinders.
Temperature Range Min °C	-30
Temperature Range Max °C	105
Max Pressure	400 bar
หน่วยวัด	mm
แบรนด์	Kastas
OD เส้นผ่านศูนย์กลางวงนอก(มม)	57.15
I.D. เส้นผ่านศูนย์กลางวงใน	41.27
THK ความหนา	19.05
Type	K18 COMPACT
Part NO	K18 057.15-041.27
วัสดุ(Material)	NBR-TPE-POM

Account

Account