K15 PISTON SEAL 80X64.5X6.3 PU

K15 is a two piece double acting sealing set which consists of a special designed polyurethane seal ring and an o-ring as energizing element.

PRODUCT ADVANTAGES
• High static and dynamic sealing effect
• Low axial housing heights
• Simple groove design , one-piece piston possible
• High abrasion resistance

APPLICATION
Light to medium duty industrial machinery ,

MATERIAL		CODE
NBR	70 SHORE A	NB^₇₀₀₁
PU	95 SHORE A	PU^₉₅₀₁

OPERATING CONDITIONS

MEDIA

Mineral oils (DIN 51524)

HFA ve HFB

HFC

TEMPERATURE

-30°C +100°C

+5°C +50°C

-30°C +40°C

PRESSURE

≤250 Bar

SPEED

≤0.5 m/sn

Note: The above data are maximum values and cannot be used at the same time.

ROUGHNESS SURFACE

Ra

Rmax

Sliding Surface ØD

≤0.4 μm

≤3.2 μm

Groove Base Ød

≤1.6 μm

≤6.3 μm

Groove Flanks B

≤3.2 μm

≤16 μm

Note: It is recommended to have 50% to 90% of the working surface material contact area value .

INSTALLATION
Easily assembled on one-piece piston. It is very important that the assembly tools must be of soft material and have no sharp edges. Before installation the sealing element must be oiled with system oil.

NOTES
It is recommended to use with two piston guide rings in long stroke cylinders , one guide ring in short stroke and under low radial loads. The permissible sealing gap values of K15 piston seal is given in the below table.

PERMISSIBLE SEALING GAP
B (mm)	Smax (mm)
3.2	0.25
4.2	0.25
6.3	0.3
8.1	0.3

Note: The largest sealing gap value occurring on the non-pressurized side of the seal does have a vital importance for the function of the seal and in this respect it is quite important to use the S value lower than the above indicated numbers.

More Information
น้ำหนัก/หน่วย (กก.)	0.1000
Application หรือ MEDIA ที่เหมาะกับการใช้งานใช้งาน	Light to medium duty industrial machinery ,
Temperature Range Min °C	-30
Temperature Range Max °C	100
Max Pressure	350 bar
หน่วย	PCE
หน่วยวัด	mm
แบรนด์	KAstas
OD เส้นผ่านศูนย์กลางวงนอก(มม)	80
I.D. เส้นผ่านศูนย์กลางวงใน	64.5
THK ความหนา	6.3
Type	K15 PISTON
Part NO	K15 080-064.5
วัสดุ(Material)	NBR, PU

Account

Account