K05 WIPER 30X38X4/7 PU

K05 is a single acting wiper ensuring that foreign particles are notintroduced into the hydraulic systems , avoiding wear and damageto all the internal components including seals.

PRODUCT ADVANTAGES
• Superior wiping performance
• Improved wiping effect of dirt , water spray , etc with the helpof the secondary sealing lip on the outer diameter
• Simple , easy-construction groove
• Wide range of dimensions
• No twisting in the housing
• Used in heavy conditions by the good tear and ruptureproperties of PU material.
• Easy installation
• Specially design to prevent big particles to go into the system

APPLICATION
Used especially in earth moving equipment , agriculturalmachinery , telescopic cylinders , cranes , mining equipment andloading platforms.

MATERIAL

CODE

PU

94 SHORE A

PU9401

OPERATING CONDITIONS
MEDIA	Mineral oils (DIN 51524)	HFA and HFB	HFC
TEMPERATURE	-30°C +100°C	+5°C +50°C	-30°C +40°C
SPEED	≤ 1.0 m/sn	≤1.0 m/sn	≤1.0 m/sn
Note: The above data are maximum values and cannot be used at the same time.

SURFACE ROUGHNESS	Ra	Rmax
Sliding Surface Ød	≤0.4 μm	≤3.2 μm
Groove Base ØD	≤1.6 μm	≤10 μm
Groove Flanks S1	≤3.2 μm	≤16 μm
INSTALLATION Generally , wiper can be easily fitted into the closed housing by deforming into a kidney shape. It is very important that the assembly tools must be of soft material and have no sharp edges. Before installation the wiper must be oiled with system oil.
NOTES K05 wipers are single acting and can be used with combination of all rod sealing elements.

More Information
น้ำหนัก/หน่วย (กก.)	0.1000
Application หรือ MEDIA ที่เหมาะกับการใช้งานใช้งาน	Used especially in earth moving equipment , agriculturalmachinery , telescopic cylinders , cranes , mining equipment andloading platforms.
Temperature Range Min °C	-30°C
Temperature Range Max °C	100°C
หน่วย	PCE
หน่วยวัด	mm
แบรนด์	Kastas
I.D. เส้นผ่านศูนย์กลางวงใน	30
OD เส้นผ่านศูนย์กลางวงนอก(มม)	38
THK ความหนา	4
Type	K05 WIPER
Part NO	K05-030 PU
วัสดุ(Material)	PU

Account

Account