Language

Cart

 

 

 

Ertalyte® PET

is unreinforced, semi-crystalline
thermoplastic polyester characterized as having the best dimensional stability. This is paired with excellent wear resistance, a low coefficient of friction, high strength, and resistance to moderately acidic solutions. Ertalyte® is capable of
sustaining high loads and enduring wear conditions.

Polyethylene terephthalate is a semi-crystalline material from the polyester family of plastics and, due to its good thermal and mechanical properties, is counted among the polymer group of engineering plastics. It has a high surface hardness and good sliding and wear behaviour.

The mechanical properties of PET are hard, stiff, strong and tough and are approx. 10 % higher than those of the similar PBT. The good sliding properties and the high dimensional stability also open up a wide range of possible applications. Good results can be achieved in joining processes with two-component adhesives on the basis of e.g. epoxy resins or cyanoacrylates as well as silicones, for example. It is also possible to paint the components. High vacuum coating of the component surface is also possible. The continuous operating temperature ranges between approximately -20 °C and +100 °C. Like all polyesters, PET is also not resistant to hot water (from approx. +60 °C) in the long term. Our round rods and sheets in natural colour comply with the food contact regulations according to 10/2011/EC.

 

PROPERTIES PET®

  • High mechanical resistance and tensile strength
  • High creep resistance
  • High surface strength
  • Easy to varnish and polish
  • High dimensional stability
  • High toughness
  • Good insulations for electrical properties
  • High chemical resistance
  • Easy to lacquer
  • Limited dielectric properties
  • Sensitive to hydrolysis

 

APPLICATIONS

  • Bearings
  • Pumps and parts for housings
  • Frame components
  • Tank lids
  • Gear wheels
  • Insulators for the electrical engineering
  • Deflection rollers for the filament industry
  • Levers
  • Handles
  • Control discs

 

More Information
น้ำหนัก/หน่วย (กก.)26.2300
Temperature Range Min °C-20
Temperature Range Max °C100
หน่วยวัดmm
OD เส้นผ่านศูนย์กลางวงนอก(มม)150
ความยาว1000
หน่วยROD
สีNAT
วัสดุ(Material)ERTALYTE PET
Write Your Own Review
You're reviewing:ERTALYTE PET NAT ROD DIA 150X1000MM(26.23KG)
Your Rating
มีสินค้า
SKU
EPETNAGH-R150-1.0
฿24,788.00

ERTALYTE PET NAT ROD DIA 150X1000MM(26.23KG)

สอบถามสั่งซื้อสินค้า
บริษัท อีโคซีล จำกัด

Facebook : @ecosealthailand
Line Official : @ecosealthailand
Website: www.ecosealthailand.com
E-mail : ecoseal@ecosealthailand.com

Tel : 02 931 6868 -71