Language
Cart

non-asbestos-gasket-page

temac banner

 

Temafast

Temafast A4 Page


- ประกอบด้วยใยอินทรีย์และยางยึดเกาะ NBR
- เหมาะสำหรับใช้งานในสภาวะอุณหภูมิและความดันต่ำถึงปานกลาง
- อุณหภูมิการใช้งานต่อเนื่อง: 140°C
- อุณหภูมิสูงสุดระยะสั้น: 210°C
- ความดันสูงสุด: 40 bar
- ขนาดมาตรฐาน: 1500 x 1500 mm, หนา 0.3-5.0 mm
- สี: แดง
- ได้รับการรับรองจาก DNV-GL, PZH, GOST, UA-Tesko

 

Temasil

Temasil A4 Page


- ประกอบด้วยส่วนผสมของแร่ทนความร้อนพิเศษและใยอะราไมด์
- เหมาะสำหรับใช้กับน้ำเย็น/ร้อน, ไอน้ำ, น้ำมัน และก๊าซ
- อุณหภูมิการใช้งานต่อเนื่อง: 250°C (ไอน้ำ 200°C)
- อุณหภูมิสูงสุดระยะสั้น: 400°C
- ความดันสูงสุด: 100 bar
- ได้รับการรับรองจาก DNV, TZW, GOST P

 

Temaplus

Temaplus A4 Page


- ประกอบด้วยใยอะราไมด์และยางยึดเกาะ NBR คุณภาพสูง
- มีคุณสมบัติทางกลที่ดี ทนต่อการคืบตัวภายใต้อุณหภูมิและความดันสูง
- เหมาะสำหรับใช้กับน้ำมัน, เชื้อเพลิง, น้ำมันหล่อลื่น, ก๊าซ และกรด/ด่างเจือจาง
- อุณหภูมิการใช้งานต่อเนื่อง: 250°C
- อุณหภูมิสูงสุด: 450°C
- ความดันสูงสุด: 130 bar

 

โดยสรุป Temafast เป็นวัสดุประเภทใช้งานทั่วไปที่ราคาประหยัด ขณะที่ Temasil และ Temaplus เป็นวัสดุที่มีประสิทธิภาพสูงสำหรับการใช้งานในสภาวะอุณหภูมิและความดันสูง

 

 


Non Asbestos For FDA

FDA products

Tealon TF 1570

17427-10328580

Restructured PTFE with Glass Spheres

Description and Applications

Tealon TF1570 is filled with glass microspheres and is suitable for aggressive chemical applications. It meets FDA conformance for service within food and pharmaceutical applications. TF1570 is the preferred material for fragile flanges, glass lined equipament or other applications that require higher compressibility.

Approvals: DVGW — TA-Luft — FDA

 

Hot Compression Test

 This performance test measures the behavior of rPTFE and PTFE gaskets in a real world environment. The chart below shows a comparison between conventionally skived PTFE and Tealon. The gaskets we tested simulated a real world application including thermo-cycling. The skived PTFE gasket showed a very high leak rate, losing 60% of its initial pressure by the end of the test.

 
The Tealon® gasket lost only 6% of its initial pressure by the end of the test and showed a leak 10 times less than that of the skived PTFE gasket. The pictures below, show the gaskets after the test and exhibit the dimensional stability of Tealon as compared to the noticeable creep of the skived PTFE gasket.

Service Limits

 
Operating Parameters TF1570 TF1580 TF1590
Temperature -450 to 500 ºF (-268 to 260 ºC)
Max. Pressure 800 psig (55 bar) 1200 psig (83 bar) 1200 psig (83 bar)
Pressure x Temperature – psig x ºF (bar x ºC) Thickness 1/16″ 350.000 (12.000)
  Thickness 1/8″ 250.000 (8.600)
Sheet Size 60″ x 60″*
Availability 1/32″, 1/16″, 3/32″, 1/8″, 1/4″
Composition PTFE with glass microspheres PTFE with barium sulfate PTFE with silica
* 59″x59″ is available upon request.
Physical Property Type of Test TF1570 TF1580 TF1590
Color   Blue Off-White Fawn
Sealability (ml/h) ASTM F 37A 0.12 0.04 0.20
Creep Relaxation (%) ASTM F 38B 40 15 18
Compressibility(%) ASTM F 36M 25-40 4-10 5-15
Recovery Min. (%) ASTM F 36M 30 40 40
Tensile Strength (psi) ASTM F 152 2030 2030 2030

  

“m” and “y” factor
Product Thickness
(mm)
“m” “y” (psi)
TF1570 1.5 2 1,500
3 2 1,500
TF1580 1.5 2 1,800
3 2 1,500
TF1590 1.5 4.4 2,500
3 3.5 2,000

 

Datasheet