Instructions for use:
a. Depth
- Pick out one pin at the backside: 3/8", 3/4" 10mm or 20mm
- Insert into the proper hole, press on a flat metal surface, then reset to zero
- Put the caliper in the groove and push forward the pin until it reaches the very bottom
- The negative value displayed on the caliper is the depth of the groove.
b. Width
Push the jaws at the tail of the Caliper into the groove with no less than 17mm, and then get the width measurement value directly.
| น้ำหนัก/หน่วย (กก.) | 0.8000 |
|---|---|
| Design Standard | DEPTH&WIDTH CALIPER |
| Application หรือ MEDIA ที่เหมาะกับการใช้งานใช้งาน | measuring functions: inner groove depth, inner groove width and deep bore diameter. It is specially designed for measuring the dimensions of seal groove. Digitak display include metric(mm), inch(decimal) and inch(fraction). |
| หน่วยวัด | PCE |
| หน่วย | PCE |
| กลุ่มสินค้า | Measurement |
| น้ำหนัก : (กก.) | 0.8 |
Write Your Own Review
DEPTH&WIDTH CALIPER
Depth and Width Caliper mainly has three measuring functions: inner groove depth, inner groove width and deep bore diameter. It is specially designed for measuring the dimensions of seal groove. Digitak display include metric(mm), inch(decimal) and inch(fraction).