Language

Cart

K30 is a single acting wiper seal combination which consists of a metal vulcanized with elastomeric nitrile rubber using special production methods.

PRODUCT ADVANTAGES
• Superior wiping effect
• Superior sealing effect
• Wide range of dimensions
• Able to work in hard conditions
• Good adjustment to temperature changes due to the metal ring

APPLICATION
Pneumatic cylinders.

MATERIAL   CODE
NBR 70 SHORE A NB7001
STEEL  ST37 FE9901
OPERATING CONDITIONS
MEDIA Prepared , dried and de-oiled compressed air
TEMPERATURE -30°C +105°C
PRESSURE ≤16 Bar
SPEED ≤1.0 m/sn
Note: The above data are maximum values and cannot be used at the same time.
    
SURFACE ROUGHNESS
Rmax
Sliding Surface  Ød
≤4 μm
Groove Base ØD2
≤10 μm
Groove FlanksS1
≤15 μm

INSTALLATION
K30 wiper/seal is fitted into the housing by means of a circlip recess. The sealing part is pushed in and fixed by the circlip. It is very important that the assembly tools must be of soft material and have no sharp edges. Before installation the sealing element must be oiled with system oil.

NOTES
For special applications that require high temperatures , K30 can be produced in FKM material.

More Information
น้ำหนัก/หน่วย (กก.)0.1000
Application หรือ MEDIA ที่เหมาะกับการใช้งานใช้งานPneumatic cylinders.
Temperature Range Min °C-30
Temperature Range Max °C105
Max Pressure16 bar
หน่วยวัดmm
หน่วยPCE
แบรนด์Kastas
Part NOK30-030
OD เส้นผ่านศูนย์กลางวงนอก(มม)40
I.D. เส้นผ่านศูนย์กลางวงใน30
THK ความหนา7
วัสดุ(Material)NBR
TypeK30 - PNEUMATIC ROD SEAL
Write Your Own Review
You're reviewing:K30 WIPER 30X40X7/9.5 NBR
Your Rating
มีสินค้า
SKU
PN-WP-0024
฿66.00

K30 WIPER 30X40X7/9.5 NBR

สอบถามสั่งซื้อสินค้า
บริษัท อีโคซีล จำกัด

Facebook : @ecosealthailand
Line Official : @ecosealthailand
Website: www.ecosealthailand.com
E-mail : ecoseal@ecosealthailand.com

Tel : 02-931-6868-71