Hydraulic Piston - Rod Seal K36

Hydraulic Piston - Rod Seal K36

K36 is a single acting piston - rod seal which consists of reinforced cotton fabric and nitrile rubber vulcanized together forming an integral sealing element.

PRODUCT ADVANTAGES
• Functions even with poor surfaces
• Reinforced cotton fabric base prevents the seal from extrusion
• Both rod and piston application
• Good sealing at low pressures

APPLICATION
Low to medium duty hydraulic cylinders , mobile hydraulics and presses.

 

MATERIAL   CODE
NBR 80 SHORE A NB8801
COTTON FABRIC NBR   NB8004
OPERATING CONDITIONS
MEDIA Mineral oils (DIN 51524)  HFA ve HFB HFC
TEMPERATURE -30°C +105°C +5°C +60°C -30°C +60°C
PRESSURE ≤250 Bar ≤250 Bar ≤250 Bar
SPEED ≤0.5 m/sn ≤0.5 m/sn ≤0.5 m/sn
Note: The above data are maximum values and cannot be used at the same time.

 

 

SURFACE ROUGHNESS Ra Rmax
Sliding Surface ØD-Ød ≤0.4 μm ≤3.2 μm
Groove Base Ødp - ØDb ≤1.8 μm ≤6.3 μm
Groove Flanks B ≤3.2 μm ≤16 μm
Note: It is recommended to have 50% to 90% of the working surface material contact area value.

INSTALLATION
K36 is to be assembled into open grooves. It is very important that the assembly tools must be of soft material and have no sharp edges. Before installation the sealing element must be oiled with system oil.

NOTES
The permissible sealing gap values of K36 piston - rod seal is given in the below table.