Pneumatic Piston Sealing Elements / K58

Pneumatic Piston Sealing Elements / K58

PRODUCT ADVANTAGES
• Ready to fit complete piston
• Low friction and smooth running due to sealing lip geometry
• Easily fastened to the piston rod without using additionalsealing elements
• Static seal on the inside diameter
• Easy installation
• Long service life

APPLICATION
All pneumatic cylinders in need of stroke control.

MATERIAL   CODE
PU       92 SHORE A  PU9201
POM   PM9901
ALUMINUM   AL9901
MAGNET   MK9901
NBR   70 SHORE A  NB7001
OPERATING CONDITIONS
MEDIA Prepared , dried and de-oiled compressed air
TEMPERATURE -30°C +80 °C
PRESSURE ≤16 Bar
SPEED ≤1.0 m/sn

 

SURFACE ROUGHNESS Rmax
Sliding Surface ≤4 μm

INSTALLATION
K58 is pushed onto the piston rod on the clamping flange towards the rod and fixed by fastening. The nut has to be secured. The sliding surface and the cylinder bore should be oiled with oil that must not go into the reaction with the sealing element during the installation process.